Corrosion-Resistant Coating

Corrosion Resistant Coatings protect metal components from degradation caused by salt spray, oxidation, moisture, and exposure to UV rays, the list goes on. Contact us for more info.

What We Use

Epoxy coatings are a great option if you are looking for tough and attractive flooring. They combine polymer resins and hardeners that result in a chemical bond with the concrete. Plus, there are many colors and decorative options to choose from.

The benefits of using an epoxy coating are:

  • Provides great durability on a surface than paint and holds up in areas of impact
  • Quick installation and easy maintenance
  • Can be applied in various use cases in both residential and commercial
  • Vibrant finishes and a lot more to chose from depending on the clients desire
  • Easy to clean and keep clean

Polyurea is a type of elastomer that is derived from the reaction product of an isocyanate component and a synthetic resin blend component through step-growth polymerization. The isocyanate can be aromatic or aliphaticin nature. It can be monomer, polymer, or any variant reaction of isocyanates, quasi-prepolymer or a prepolymer. The prepolymer, or quasi-prepolymer, can be made of an amine-terminated polymer resin, or a hydroxyl-terminated polymer resin.

The resin blend may be made up of amine-terminated polymer resins, and/or amine-terminated chain extenders. The amine-terminated polymer resins do not have any intentional hydroxyl moieties. Any hydroxyls are the result of incomplete conversion to the amine-terminated polymer resins. The resin blend may also contain additives or non-primary components. These additives may contain hydroxyls, such as pre-dispersed pigments in a polyol carrier. Normally, the resin blend does not contain a catalyst(s). via Wikipedia

Polyaspartic chemistry was first introduced in the early 1990s making it a relatively new technology. The patents were issued to Bayer in Germany and Miles Corporation in the United States. Pure polyurea reacts extremely quickly making them almost unusable without plural component spray equipment. Polyaspartic technology utilizes a partially blocked amine to react more slowly with the isocyanates and thus produce a modified polyurea. The amine/diamine or even triamine functional coreactant for aliphatic polyisocyanate is typically reacted with a maleate. Polyaspartic esters (PAE) as they are often called, initially found use in conventional solvent-borne two-component polyurethane coatings. Via Wikipedia. 

This is general information on what can be done for corrosion-resistant coatings. For more information on specific work regarding our corrosion-resistant coating service, please contact us.